• Winkelwagen
  • U heeft nog geen producten in uw winkelwagen.

  • Verlanglijst
  • Uw verlanglijst is leeg.

Wachtwoord vergeten

Or connect with

51”/129cm camerastatief draagbare flexibele aluminium reisstatieven 17.63lbs belasting met draagbare monopod en draagtas voor DSLR-camera's

4.9 10 beoordeling(en) KF09.097
68,79€
&Gratis verzending naar Netherlands, Belgium
  • Merk: K&F Concept
  • Koop K&F Concept 51”/129cm camerastatief draagbare flexibele aluminium reisstatieven 17.63lbs belasting met draagbare monopod en draagtas voor dslr-camera's online, gratis verzending en 30 dagen retourgarantie.
  • KF09.097
  • Model: KF09.097
  • 68.79
Koop 2+ items en krijg 10% korting !
Kenmerken
  • • 【Lichtgewicht en draagbaar】 Statiefbuis gemaakt van hoogwaardige aluminiumlegering weegt slechts 2,20 lbs, meet 13,38 "lang wanneer opgevouwen, superlicht en compact met een laadvermogen van maximaal 17,63 lbs / 8 kg, waardoor het ideaal is voor binnen- en buitenfotografie.
  • • 【Handig en flexibel】 22 mm buisdiameter, 5-delige poten met spiraalvormige vergrendelingsknop stelt u in staat om de werkhoogte in seconden aan te passen van 17,71 "tot 61"; Statiefpoten kunnen worden aangepast in drie niveaus van openingshoek om te stabiliseren op verschillende ondergronden en hellingen.
  • • 【Afneembare monopod】Dit statief kan snel worden gedemonteerd met de centrale asschroef en omgevormd worden tot een monopod, wat een alternatieve manier van fotograferen biedt.
  • • 【360 ° panoramakogelkop】 De speciaal ontworpen 25 mm kogelkop kan 360 ° draaien en vrije hoeken krijgen, zodat u elke keer de perfecte foto en een geweldig panorama kunt maken.
  • • 【Brede compatibiliteit】De 1/4"-snelschroef is geschikt voor de meeste camera's, DSLR-camera's, projectoren en telescopen, enz. Je telefoon kan ook via een extra telefoonhouder worden aangesloten.

Kleur Oranje, Zwart
Poten gevouwen voor opslag En
Met Monopod En
Middenkolom kan onder een hoek van 90° worden vergrendeld Nee
Type vergrendeling: Spiraal type slot
Materiaal Aluminium profiel
been secties 5
Middelste kolomsecties En
min. buisdiameter (mm) 10 mm
Maximaal Buisdiameter (mm) 22mm
Max. hoogte (met middelste kolom omhoog) (mm) 61"
Maximaal Hoogte (met middelste kolom omlaag) (mm)
Weinig. Hoogte (mm) 13"
Gevouwen Hoogte (mm) 13"
Laadvermogen (kg) 17,63 vijver
Productgewicht (g) 2,20 vijver
Beoordelingen (10)
Om een beoordeling te schrijven moet u inloggen of zich registreren

5
Nice tripod strong and sturdy dose the job
26-08-2021
5
Very happy with this tripod
25-08-2021
4
Hook of shoulder strap is missed. Hope Amazon help me to change it.
24-08-2021
5
I bought this tripod to replace my top-quality Manfrotto, which has been a trusty companion for over 20 years of professional photography.

I needed a smaller, but still solid tripod to fit in the back box of my Honda 50, along with a large medium format camera, for local photo-trips. I measured the back box interior and noted the dimensions information that was given with the tripod, and it fits perfectly (see photo).

I was a bit dubious about the ball head holding my very heavy camera, so I replaced it with the heavy-duty pan and tilt head from the Manfrotto and it works perfectly. I've put the ball head from this one on the Manfrotto to hold a DSLR that I use for digitizing negs.

No, it's not as sold and robust as the Manfrotto (which cost 3 times as much), and that's to be expected. But it looks like it will do the job, and saves me from putting a really heavy tripod on my back when I go out on the bike!
15-08-2021
5
K & F products first caught my eye at the Photography show back in 2019 but I didn't really have a close look at any of their tripods as I was fixated on getting a Three Legged Thing. As it turned out I didn't buy anything and didn't get a tripod for more than a year. With finances tight I decided to take a chance on a K & F tripod figuring at that price it wouldn't be too much of a wrench if it wasn't great. I was very pleasantly surprised when it arrived to find that it was more than I expected for the money - seemingly very well built and nice and light into the bargain with a quality carry bag. There are only two negatives in my mind - why use all that lovely magnesium alloy and then stick on plastic knobs for the ball clamp and adjustment? Surely it wouldn't have increased the cost too much to make these in the same alloy? The ball clamp did click ominously one time I tightened it so I'm hoping it isn't going to be a possible weak point. Also, the tripod leg that unscrews to make up the monopod - the female thread is metal but I believe the male thread is plastic, why? I doubt I'll use this feature much so not too much of a concern. I wouldn't hold out much hope with customer services - I did email them about something and had a very strange reply. I don't think I'd even bother trying to pursue a warranty claim. TLT on the other hand are great to deal with and solved a problem with my Ellie very quickly.
It would have been nice to have detachable feet but I guess you can't have everything at this price point? The tripod has a very large height extension so unless you're over 6' 5" you won't have any problems using it. Lastly I really like the orange colour of the alloy components - it matches my Three Legged Thing Ellie L bracket perfectly! I honestly don't think you can go wrong at this price - mine will certainly suit my needs until I can upgrade to a carbon TLT in the future.
14-08-2021
Gallery

These images belong to K&F Concept end users.

FAQs
Om een beoordeling te schrijven moet u inloggen of zich registreren

A
To hold telephoto lens, it is recommended to use a tripod mount ring additionally for better balance. Meanwhile, it is better to hang some heavy thing to the hook to lower the center of gravity on this tripod to make it more sturdy and less prone to vibrations. 
A
You still use the center pole with articulating ball and plate on top. Hole the curved metal piece on the bottom of the center pole and unscrew it, then the middle bar will slide up and out of the tripod and screw into the top of the monopod leg. 
A
For how to install the foot locking system, please refer to this video https://youtu.be/jZb6Fn6T_u0. 
A
To hold telephoto lens, it is recommended to use a tripod mount ring additionally for better balance. Meanwhile, it is better to hang some heavy thing to the hook to lower the center of gravity on this tripod to make it more sturdy and less prone to vibrations. 
Specificaties
Statief Algemeen
Laad capaciteit 8kg/17.64lbs
Maximale werkhoogte 1290mm/50.79"
Maximale hoogte zonder middelste kolom 1010mm/39.76"
Minimale werkhoogte 440mm/17.32"
Gevouwen lengte 337mm/13.27"
Gewicht 1168g/2.57lbs
Materialen Magnalium Alloy
Balhoofd Ball Head
Kleur Orange/Black
Belniveau
Statiefpoten
Type beenvergrendeling Spiral Type Lock
Beenposities
Onafhankelijke beenspreiding
been secties 5
Beendiameter: 10-22mm/0.39-0.87"
Voeten Kenmerken:
Statief middelste kolom
Functies middenkolom Center Column Inversion
Middelste kolomsecties 2